...car. So...I replaced the battery and it still won't start on occasion. Any ideas? I have the same car - same problem. Too hot or too cold and then just another once and while for good measure :( I've ...
Question about Subaru Legacy
...replace them from underneath the car? Access from top is better but you must remove battery/washer reservoir driver's side and intake piping on passenger's side to get to the plugs. If you have bad ...
...replace 2000 subaru outback starter motor? 1) Remove air cleaner box 2) Disconnect battery 3) Remove 2 bolts that mount starter 4) Remove wires at starter 5) Remove starter 6) Reversr order to ...
...wire between battery positive terminal & the exposed terminal on the solenoid. If starter motor now operates then it's the ignition switch. If starter motor does not operate then replace
...battery lights. I just had the clutch replaced, and the head gasket, now this. On a side note, when I got the head gasket fixed, the car now idles poorly, almost like it's not firing right. It is ...
...further potential problems with reinstalling the engine......do a OBD II scan first......then check lights off delay module.....replace key fob battery often too avoid keyless entry
...outback with the parking lights on and the battery nearly drained. The key was out of the ignition, the light switch was in the OFF position. Nothing else worked so I removed fuse #31 that feeds the ...
...good. Sometimes just turning the bolt will clean them up but better to remove, clean and replace. Also make sure battery terminals and wires are clean and secure. Hope this helps and have a great
...outback with the parking lights on and the battery nearly drained. The key was out of the ignition, the light switch was in the OFF position. Nothing else worked so I removed fuse #31 that feeds the ...
487 questions posted
Usually answered in minutes!
447 Questions
411 Questions
381 Questions
317 Questions
291 Questions