1999 Subaru Legacy "change plugs 2" Questions

cykinder 2 and 3 missing subaru how many miles on it and has the spark plugs been changed. changed the spark plugs

...change spark plugs on subaru legency 97 2.5 engine automatic you need to remove the 2 engine mount nuts and raise the engine with a jack and some wood blocks. then with an extention and a u-joint you ...

...plugs, changed the exaust sensor. Check engine light still on after all that. 1 you need to get the code. 2 sounds like the catalitic converter is bad. If the code was for the exhaust sensor, the ...

2 normal, wanted to stall everytime I tried accelerating. Now, it won't turn over at all. Changed the plugs, wires, and tested the coil by disconnecting wires and seeing if there is a spark. Any ideas

check eng lit on how do you clear it. just changed the plug and put on a new catalyst converter If that actually repaired the fault the code should reset after several starts however, there are 2 ...

...not working. The car has an entierely new cooling system (radiator, water pump, thermostat, coolant changed 2 weeks ago and is full). When i try to turn on the heat, it sometimes blows warm air, but ...

...on 2 clyilenders i changed the plugs wires coil and igniter . when i replaced the coil it ran perfect for 5 seconds an then shut down the other two clyienders again. what could make this

...2-3 hrs. It sat over night and now will not start; cranks, but won't turn over. We've had to pump gas to get it to start before. Changed plugs, wires, fuel filter, egr valve. Are you getting spark? ...

...up.Plugs,wires,gas filter,air filter and if all is well on that aspect of the engine I would change the EGR valve due to fuel mixture and advance control due to turbo.........Hope this helps you

plugs and checked for spark and there was nothing. changed coil pack no differance. open to ideas Check distributor cap for cracks Run a compression test on all cylinders. +/- 10% across all cylinders