...bottom of the shift handle and the tranny. This is best done at a good auto repair shop or dealer. If this is a manual transmission car, you probably have a worn out clutch plate or broken shift ...
bottom of the column. The switch is held on my two screws (5/16..maybe one a phillips screw). Loosen the screws and slide the switch. In your case with not turning back far enough to get the key out I
...bottom. You39;ll need to snake the yellow wire back under the lock plate far enough to fit the yellow and black disc back on, line up the white tube and the bumps then push in. put the other snap ...
...bottom out on the floorboard before giving you all of the travel necessary to disengage the clutch. Fierostore.com sells a replacement pedal for about 50 bucks. This is the first place I would start ...
...plate - 10 bolts and 1 screw (although not necessary, you can get more room by removing the lower metal dash bracket as well - 5 bolts)- three 10mm bolts holding the bcm in place- 2 wiring connectors ...
558 questions posted
Usually answered in minutes!
447 Questions
381 Questions
317 Questions
328 Questions
291 Questions