torque specs 1995 subaru 1995 subaru legacy torque specs torque converter Did you want the torque converter mounting bolt torque? If so, it is 17 to 19 foot pounds.
...torque converter to the flex plate the bolt holes didnot match. Only to find out that the torque converters were different sizes. The original torque converter is larger than the replacement torque ...
...torque converter. If the torque converter is faulty the gear tends to slip. I strongly suggest that you replace the transmission fluid and torque converter to resolve the problem. Once replaced a ...
...shift. Think it could be either the Catillitic converter or torque converter in trans. Not sure either way definately not the catylitic converter. check your atf level before you really start to ...
...torque converter losing power I'm confused Sounds like the dealership/technician is just guessing. I would try a couple of things. First with the car in neutral or park, engine running, floor the ...
transmission wont sift out of third. Sounds like the torque converter is stuck.
torque converter (essentially a motion transfer device that resembles two fans facing each other) may be bad. As the engine spins, up, the fluid in the torque converter starts spinning and flowing and
well we move the gearshift to all the gears and none of them will make the car move hi sounds like either the clutch or torque converter is broken
...torque converter hold (fluid that is)my friend drained thinking it was the oil The converter will hold about three quarts of fluid, it is not necessary to fill it be cause the transmission will fill ...
...torque converter. What seals could be leaking? & can the tranny be pulled without pulling the front differential & torque converter? I'm not sure about what gasket to check, but I've always left my ...
522 questions posted
Usually answered in minutes!
447 Questions
411 Questions
317 Questions
328 Questions
291 Questions