1996 Subaru Legacy "change belt" Questions

...belt change - which mileages? 245k on clock, changed once at 197k 1.8 L no turbo station wagon (estate) subaru legacy 1991. Cam belt changed 197k, now at 245k. When does cam belt need re-replacing, ...

...belt, water pump and labor. You do not have to change the water pump but it would be wise to do so when everything is apart and accessable. yes u have to change timing belt when changin a water ...

bucks but sometimes pending mileage i would change out the belt tensioner they run about 100 buck so be prepared. but youll prolly never have to change it again though.like i said they last for ever!!

change cam belt on 1995 legacy change cam belt on 1995 subaru legacy If your going to do or get this done you need to replace the camshaft seals crankshaft seal and water pump plus the idlers and ...

Does a 1993 Legacy 2.2 have a timing belt that needs replaced at a certan mileage? Hello there, Yes these cars do have Timing belts, I always recommend changing your Timing Belt at 75,000 miles. It is

...change my engine belt in my 2001 subaru b4? I assume you mean the camshaft timing belt? If it has never been replaced, the answer is "yes." Otherwise follow the service interval outlined in your ...

...Legacy Wagon.Told I need to replace the Serpentine Belt.If the belt should break before I have it changed,will the vehicle still operate? Depends on which belt - if it's the timing belt, no, the ...

belt change, how do we find proper timing? there should be marks on crank pully and cam belt pully. rotate motor until crank pully timing mark is on zero.the cam belt pully should be lined up with its

cam belt change i have a 51 reg 1.2 ford fiesta v-tech engine that has done 60,000 miles, can you please give me an honest answer on when the cam belt should be changed. Thank you AT 100,000 KM

i have a 2.5 DOHC i changed the timeing belt and head gaskets in but it will stop turning when turned by hand . all the timeing marks line up . help The timing marks are align in the correct position ...