torque specs 1995 subaru 1995 subaru legacy torque specs torque converter Did you want the torque converter mounting bolt torque? If so, it is 17 to 19 foot pounds.
how do i replace the o2 sensor for a 1994 subaru legacy? The o2 sensor will look like a spark plug on your exhaust. it is going to atleast need one.. They are torqued to spec you can find that out ...
oil pan bolt torque specs. for a 1998 Legacy Outback.2.5 engine? Torque the oil pan bolts 36 to 40 in-lbs. starting from the center and working your way to the ends.
I need to know the torque specs for the axle to hub on a 97 subaru legacy outback... Factory specs are 122 to 151 lbs.
Replacing a timing belt on a 96 subaru legcy gt 2.5L. I need to know the cam shaft torque specs? 58 ft.lb/78 nm
need plug gap for 1993 subaru legacy .039-.043 in or 1.0-1.1mm torque specs 13-17 ft lbs
torque specs on halfshaft nut 216 Nm or 159 ft-lb
oil leaks on left side of oil pump I have installed a new oil pump and all seals according to the book, however I still have oil dripping on the drivers side of the oil pump where it meets the block. ...
what is the torqe specs for a 1997 subaru legacy flywheel? The bolts that attach the flywheel to the engine should be torqued to 51 to 55 foot pounds.
...torque specs. on a 1999 dodge ram 1500,318? The torque values are 85 ft/lbs. Tighten the bolts in at least three stages, the first tightening should be 30 ft/lbs and then at least twice at the full ...
630 questions posted
Usually answered in minutes!
411 Questions
381 Questions
317 Questions
328 Questions
291 Questions