2001 Mercury Mountaineer "right side mirror light stays" Questions

...right connection the door ajar switch in the drivers door is most likely sticking clean or replace switch which is located in the latch assembly There are 2 things we see on these models. 1st one is ...

2004 vwbeetle,right signal light dont work light stays on on side mirror and signal light stays on on panel can be the switch that is faulty

...side mirrors don't work my abs light came on but fuse is fine. can I drive it for a few miles to get light to go out?all I did was pull fuse and put it right back in and abs light stayed on Remove ur ...

...right on top where they enter the headliner because the person that changed out my windshield used a tool to remove the windshield and accidentaly slashed my wires and shorted them out so my short ...

...side mirrors.You also get two beeps of the horn using the remote to lock the truck.For no reason the alarm sounds at all hours of the night.While driving,the warning light for door ajar stays on ...

...side under the steering column and right above the brake pedal and gas pedal get a hand held mirror and look you will see a gray box right above the computer connector you will see a pink chime box a ...

...Right now, I have to pull out the 15 amp fuse for the power seat adjustment controls and the side view mirror controls in order for the reading lights to turn off. Also, the A/C will be on Auto high ...

...right of it is a second similar clamp with a small hole in it. I used a #10 sheet metal screw (hex head) to snug the two sides of the clip together and add resistance to the visor's movement on the ...

...side of the dome lamp and reading lamps for illuminated entry. The dome lamp and reading lamp will remain on for 20 seconds after the ignition key is removed and the last door is closed. In addition, ...

...right and turning off when they are supposed to and not slowly draining your battery. Another suggestion is to check your battery cables. The next time that your car wont start wiggle your cables ...