Door Panels How do you take the window crank off? I need to take off the door panel and I have no idea how. The only spot holding it on is the window crank now There's a small wire clip right behind ...
my car will not crank. i have replaced starter, wiring,battery cables, timing belt. it will turn over and try to catch but will not crank Please explain - when you say it wont crank - do you mean the ...
...was driving my Tracer, she said it made a ticking noise then died. I tried to start it, it just crank and cranked. I've worked on cars all my life. It sounded like the timing belt went. The belt ...
car won't complete turn over. sound like it is cranking, but immediately goes off. if i press accelorator, it stays crank until i let accelorator go The alternator
engine cranks but car wont start pull spark plug wire see if you have spark when cranking it over if you do not is probaby your ignition control module
What positions do the Cam Shaft and the Crank Shaft need to be in when replacing a timing belt on a 1998 Mercury Tracer? Just mark the cam and crank shaft in the position that it is in before you take
94 mercury tracer no spark Crank sensor or coil. Rare instances, could be the ECM or wiring. If no codes are set, start with testing ignition module and coil. Next, crank/cam sensor. Parts stores can ...
Question about Mercury Tracer
...off, turns out the tensioner and the serpentine belt failed, but regardless the car still wouldn't crank back up. Replaced the tensioner, serpentine belt, and crank position sensor since the belt
...to turn over but just doesn't seem to completely catch. Pump the gas peddle four times without cranking the motor. Now hold the gas peddle down and crank the motor. See if this makes it start. ...
...on cylinder head check with a mirror. loosen tensioner bolt 13 mm and slide to loosen belt remove crank shaft pulley to get belt off crank shaft and reassemble in
183 questions posted
Usually answered in minutes!
157 Questions
136 Questions
106 Questions
78 Questions
77 Questions