2004 Jeep Grand Cherokee "fix blend door motor" Questions

Ad

...it is broken the whole dash has to be removed so the heater box can be taken out to replace the blend doors.Big job,do a heater core while your there if you fix it so you dont have to do it

Ad

Question about Jeep Grand Cherokee

1 Answer

...blend doors, and this is a common problem on the GC. There is an inexpensive DIY kit on Ebay from JGCParts that will fix the problems without having to remove the dash panel. The HVAC system is ...

Ad

Question about Jeep Grand Cherokee

2 Answers

...blend door fro the actuator to the door itself, any ideas how to fix a broken one or a place to get part without the whole update kit? THE INSERT IS PART OF THE ACTUATOR MOTOR. THE MOTORS ARE ...

Question about Jeep Grand Cherokee

2 Answers

...blend door i found the motor to be ok but the door was broken. if you go to you're dealer they have a new updated door and a few other pieces you have to put in also. Also if they check the computer ...

...Blend Doors" and I'm sure You'll find pleanty of info. Also google "Heater Treater" for a fix. If your not getting any air, you may have a burned out connection going to the blower control module. ...

Question about Jeep Grand Cherokee

1 Answer

...fix with zip tie to secure it to the plastic grate behind glovebox. Air flow is back and working fine, but now with system off, I have air coming through the defroster which can be temp controlled by ...

fix this. first ill prove the dash system does not need total dismantle for all jobs. Does NOT. Air /mix blend door Single Zone/Dual Zone Driver's Side(FSM) Disconnect and isolate the negative battery

Question about Jeep Grand Cherokee

1 Answer

...fix these acz fault codes? Is dash board removal nessesary? Do any of these fault codes require me to replace the recirc blend door and midcase? 45 = Mode motor was not responding 46 = AI (Recirc) ...

Question about Jeep Grand Cherokee

1 Answer

...blend door in the heater box. You'll need to see if it is moving the door. I have seen the doors break and the motor just spin. If the ac controller detects the motor is travelling too far, it will ...

Question about Jeep Grand Cherokee

1 Answer

fix? ok if you have the vacuum type controls for temp/ac you may have a clogged vaccuum line if yours is like mine all electrical with blend door motors then chances are either the motor has failed or

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

3,696 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...