2004 Jeep Grand Cherokee "brake light switch" Questions

...brake light switch, it is down on the brake pedal lever, you can dis-connect the wire connector at the brake light switch and check for broken wires at the connector, and then jumper the connector ...

...brake light switch under dash follow brake pedal up to steering column there u will find ur brake switch check that proper mounted than test switch and replace if bad Check operation of the brake ...

brake light circuit from amperage overload. If the fuse has failed it will not allow the electrical current to continue to the brake lights. To check the fuse, first locate the brake light system fuse

...brake light bulbs in the brake light housings for bad bulbs. Next check the brake light switch at the brake pedal to see if there is power going to it. With a voltmeter check the switch and if it is ...

...brake light switch have you check for power at the sockets for the brake light. if you have no power and as you say the brake light switch is good then you have a brake in the wire between the two ...

...brake light fuse on my 2003 jeep grand cherokee? fuse 19 under the dashboard is antilock brakes. Is that the correct fuse? That's for the abs system only, not the brake lights. All brake lights are ...

...brake light switch that is located just above the pedal arm. If it is a little out of adjustment, your lights will stay on. have you checked brake switch on brake pedal. if you go under driver side ...

...brake light switch 2001 grand cherokee It is attached to the top part of the brake pedal just above the curve Usually, the brake light switch sits just behind the brake pedal. There should be a ...

...there. american model?? renew the brake light switch .they are different to europeon models .We have seperate lights so brake light isnt the indicator light as well .Fancy switch cost a few ...

...BRAKE LIGHT SWITCH MAY BE SHORTED INSIDE, OR STUCK ON. IT IS ON THE BRAKE PEDAL ARM UP UNDER THE DASH. UNPLUG IT. IF THE BRAKE LIGHTS GO OUT REPLACE THE SWITCH hi this could be due to a stuck switch, ...