1994 Jeep Cherokee Country "control arm assembly" Questions

Ad

Question about Jeep Cherokee

1 Answer

...control arm bushings causing this problem ? , do I replace these if still having vibration. Hub should not come apart...it needs to be replaced. Drive out whats left of it however you can. be careful ...

Ad

...control valve. They generally develop small leaks where the actuator arm goes into the assembly. They are generally in the $30 dollar range and can easily be replaced.Don't forget to "top off colant ...

Ad

Question about Jeep Cherokee

2 Answers

...assembly Accelerator cable Cruise control cable, if equipped Transmission cable, if equipped Control cable bracket Valve cover NOTE: Keep valvetrain components in order for reassembly. Rocker arms ...

Question about Jeep Cherokee

4 Answers

...control arm attach to the frame. Inspect these for torn rubber/missing bolts. (These 2 bushings are on the fore end of the wishbone where you changed the upper ball joint.) 3. The bushings in the ...

Question about Jeep Cherokee

4 Answers

...control arm. The cross member attaches to the frame in front of the rear axle (bolts through rubber bushings), and directly above the differential, at the apex of the cross member, is a ball joint. ...

...control arm from the spindle to replace the joint. First of all . Make sure that the control arm bushings are good on the control arm. If they have any deterioration or cracking, it would be advised ...

...control arm assembly No. 1 and 2 rear suspension arm assembly Toe control link Rear axle from hub assembly using a plastic hammer No. 2 rear wheel bearing dust deflector using a screwdriver 4 bolts ...

control arm and wack the end on it till the ball joint separates from the control arm. using a pry bar put it thru the control arm so you can pry down on the control arm to release the ball joint then

...control arm 1994 Pontiac Grand Am SE 2.3 Quad 4. The control arm bushings are going bad. I want to just replace the whole control arm assembly. I can't seem to find any for the 1994 year. I can find ...

...control arm outboard end. Remove the upper shock nuts. Remove the stabilizer link lower nut and then separate the stabilizer link from the lower control arm to gain access to the lower shock bolt. ...

Not finding what you are looking for?
1994 Jeep Cherokee Country Logo

332 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Jeep Cherokee
1998 Jeep Cherokee

1,380 Questions

1999 Jeep Cherokee
1999 Jeep Cherokee

1,162 Questions

1995 Jeep Cherokee
1995 Jeep Cherokee

698 Questions

2000 Jeep Cherokee
2000 Jeep Cherokee

672 Questions

2001 Jeep Cherokee
2001 Jeep Cherokee

659 Questions

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...