1992 Jeep Cherokee Briarwood "better replace rear end" Questions

...better, but did not fix the problem. We had just replace our front pads not too long ago shcked them again, seem to be okay except that one side is wearing a little uneven. The caliper on that side ...

...replace the rear window hose, it broke right at the body so I can't splice it. Thank you Tony Weld broke twice likely because job wasn't done well. Shop didn't reenforce post when making repair. I ...

...shaft and see what turns if the wheels spin freely its not the rear end its clutch or transmission if not then its the rear end witch you would be better off replacing as a unit . Arn't vehicles ...

better option. If you get it rebuilt you will have new parts in the rear end and know what you have verses the cost of a new rear end. This of course depends on how much damage there is in the rearend

...rear end. IT may have run out of lubrication. These are not cheap and you would be better off replacing it. The lubrication that they use in those smells really bad. Check for seal leaks at the axles ...

...in the bottom of the `punkin'.It's not a job for the common mechanic.  You might be better off,if there's much damage, to just get a salvage yard rear-end to replace it.  ...

...better unless you're willing to fully replace the whole unit. Converting to a coil suspension will cost way less and end the repairs for good. Check out these guys You searched for lincoln navigator ...

...you have to dislodge to remove that end an ebay seller has replacement ball pivots as well and a better price than amazon 2 Rear Hatch Liftgate Lift Support Shock Strut Arm Rod Damper 94 97

...the diff construction it is better to get the whole diff assembly --housing and all as the fix is just to drop out the whole rear end and fit the replacement unit. Labour time around 4 hours or

...replace it possibly with a better read end that might be compatible???? Any ideas or suggestions would be helpful if its not jacked up and has factory stock wheels on it and going to stay that way ...