1999 Honda Odyssey "transmission control solenoid problems" Questions

Ad

...transmission fluid - Faulty pressure control solenoid valve 'C' - Pressure control solenoid valve 'C' harness is open or shorted - Pressure control solenoid valve 'C' circuit poor electrcial ...

Ad

...transmission range switch also talks to the driver's multiplex control unit which runs the shift interlock solenoid. Of course, the shift interlock solenoid could be faulting by itself. But because ...

Ad

Question about Honda Odyssey

1 Answer

...transmission control system/mil---malfunction===causes ---wiring --- TCM ( transmission control module) code p 0730 refers to incorrect gear ratio====causes --TR sensor / switch--shift ...

...transmission locks up. If unable to see the RPM change, and the Engine Control Module (ECM) is turning on the lockup solenoids, then the problem has to be internal to the transmission. The ...

Question about Honda Odyssey

4 Answers

...transmission slipped again and after driving it for about 5 minutes the problem stopped again. The check engine light was on and after hooking up a code reader it said P0740. Am I looking at an ...

...control curcuit. how do i fix this? well for the start if doesn't have problem when running i suggest do a transmission flush oil and filter (to get debris out of the fluid that might be clogging the ...

...transmission replaced 2 years ago. Had it hooked up and it came up with code P1259 Manufacturer Control Fuel Air Metering. Does anyone have any ideas as to whats going on. Thanks I'm not sure why you ...

...transmission in Park or Neutral until radiator fan comes on. Test drive vehicle at 40-55 MPH for about 2 minutes. Decelerate for at least 3 seconds with throttle fully closed. Reduce vehicle speed to ...

...Transmission lock up control system. the first code can be caused by a loose or non-factory fuel cap or a leak. The second code indicates the transmission torque converter lock-up solenoid could be ...

Question about Honda Odyssey

1 Answer

...into gear. How can it be repaired? Code 780 means the transmission is not responding to the control module signals. In most cases the problem is a valve body, solenoid, or other mechanical

Not finding what you are looking for?
1999 Honda Odyssey Logo

364 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...