1999 Honda Accord "clock hazard switch" Questions

...clock and otherm necessary connectors includeing the hazard switch connector to remove the panel..u should be able to remove the switch with a screwdriver..reinstall everything back the way u took it ...

clock and hazard switch assembly out (think it has like four clips that hold it in but you can pry it out) disconnect the two connectors going to that should be 1 screw behind where the clock is and 2

hazard switch they did not work then they started again cant find relay it sounds like it is behind ins clocks but cant get to it . if you have trouble with your indicators or hazard lights change the

...work Did you check the turn signal fuse? Consider replacing the clock spring in the steering column where the turn signal and hazard lights get their juice if your hazard switch is not on the

...the switch is called a clock spring. To test unplug the connector under the dash going to the switch and plug in a new switch. and manually turn the new switch back and forth to see if systems

...hazard switch and other switch next to clock using a flat blade to pry them out. -Unclip switches disconnect plugs. -Remove 2 screws revealed behind switches. -Take your time to remove fwd console / ...

...box, which in turn protect the hazard lights, antenna, ECU memory, brake lights, tail lights, ABS, power locks, clock, horn, illumination, stereo, HVAC, interior lights and alarm.

hazard lights. Already changed the multi function switch. What to look for next? Already changed the multi function switch and now the wipers and cruise control work but still no turn signals, hazards

...on, all 4 turn signals flash and the clock/dashboard lights flash as well....any help? You have a short within the wires of the turn signal switch and hazard switch. You might need a new ...

...hazard switch ,headlamp switch , message center switch all work, it is not a fuse . The gear shifter I would say the bulb is burnt out . The steering wheel lights could be out because of an open in ...