Question about Honda Prelude
caliper under the parking brake bracket? The piston is connected to the parking brake bracket, how do I disassemble? Question edited for clarity. Question moved to model category. The parking brake is
...caliper piston back to make room to fit around everything but it did not move. i checked to see if the piston moves out it does and goes back to the same place . The pistons on the rear calipers must ...
...brake caliper. Install the brake pads and caliper assembly. Lubricate the guide pin. Tighten the guide pin to 16-23 ft. lbs. (22-31 Nm). REAR : Pull out the pad springs and then remove the pads and ...
Question about Cars & Trucks
...brake caliper pistons wont move & 1is broken You have to open the bleeder valve on rear calipers, as well as turn or screw in the parking brake adjuster, which is turning the caliper piston in or ...
...brake. went for a test ride and rear passenger rim and rotor hot and smoking? you may have to pull that side off and see if the caliper piston moves back in place freely,if not then you will have to ...
...brake caliper away from the brake rotor and anchor plate. There is no need to remove the parking brake cable or brake hose. Remove the inner and outer disc brake pads. To install: If installing new ...
...brake caliper piston. 6. Check up the brake fluid level on the reservor, and emptying if neccessary! 7. Push piston back into brake caliper housing. 8. Install inner brake pad (with expanding spring) ...
...brake caliper out sand it careful and lub it and put it back in. After that i had to bleed the brake all 4 of them. If you don't know what u doing then replace it. After rear brake calpier servicing ...
...brake operated by rear caliper? If so, is there a special procedure for moving the piston inward when replacing the brake pads? Parking brake is operated by a cable and not the caliper. Your car has ...
...brake caliper the piston in the caliper will need to be rotated back into the caliper bore. there are special; tools for this but sometimes a multi position wrench can be used. If when rotating the ...
126 questions posted
Usually answered in minutes!
231 Questions
172 Questions
159 Questions
154 Questions
137 Questions