engine does not turn over when you turn key sounds like metal on metal grind....sounds like flywheel is jammed The starter is bad, the drive that extends out to engage the flywheel has failed. If this
where is the starter on a honda passport 97. engine turns but sounds like starter is dragging but doesn't engage on the engine near flywheel
Question about Honda Passport
...I suggest that the clutch plate is installed back to front and the clutch hub is hitting on the flywheel
replace flywheel how replace it again, and no year. 1993 to 2002 in uSA< you in USA? what engine does it have. what transmission? stick or auto. 2wd or 4wd? (4wd has a transfer case added to the ...
...120-200 amps? Shotta may be right since the Bendix (it engages and disengages the starter gear/flywheel) could be full of gunk but I would check the simple (and more common) sources of
1997 honda passport 3.2L V6 flywheel location Where is the flywheel location? Need to stop camshaft fron turning to change the timing belt. Its in the egine. its under your spare tyre storage.
...metallic seal damage. Your problem is the freeze plug located between the rear of the motor and the flywheel and you need to remove the transmission to replace the freeze plug to fix your ...
makes a squeling noise when i push in the clutch Sound like a release bearing or a spickot bearing in the flywheel. Whichever it is the gearbox will have to come out to check it.
repeated broken flywheel/flexiplate i have a 98 honda passport. i've replaced the flywheel/flexiplate three times. mechanics doesn't know what's wrong. they think it has to do with the transmission so
275 questions posted
Usually answered in minutes!
298 Questions
282 Questions
252 Questions
196 Questions
166 Questions