That error comes from the CAM SHAFT POSITION SENSOR. It tells the computer when the cylinder is at TDC. The common causes for it throwing the code 1361 is, Worn timing belt, bad connection, bad sensor
...cylinder position (CYP) sensor circuit. The CYP sensor detects the position of #1 cylinder for sequential fuel injection to each cylinder. This sensor is located inside the distributor and is not ...
LX 2.0l. Where is camshaft position sensor? Hello. Your Honda's camshaft position sensor is on the front of the engine, fastened to the cylinder head(s). Good luck and keep me informed; if you want to
...Cylinder position/camshaft position sensor which is located near the distributor. Make sure it is not shorting out and clean the area. If that doesn't work then the distributor needs to be replaced. ...
...position sensor on a 1998 Honda Civic LX (4 Cylinder)? Remove the left front wheel....(drivers side). Remove all accessory belts. Remove the crankshaft shaft pulley.......remove the plastic lower ...
97 civic will not start..it's getting fuel and spark my 97 civic is getting spark to all four cylinders..its getting fuel to the fuel rail it just sits there and turns over but car will not fire have ...
...position sensor. i've replaced the sensor and also the crankshaft sensor but neither of those things have worked Does this help? ...
...cylinder your crank position sensor does not read individual cylinders, only the position of the crank shaft. make sure the plugs and wires are good, check the spark coming from the coil, make sure ...
...engine light is on and the code is Cylinder Position Sensor Intermittent Interruption, what is it? and how do i fix it? thank you crank position sensor ,renew it ,but it could be just the connector
civic code 9 code 9 Code 9 which is the cylinder position sensor.
1,584 questions posted
Usually answered in minutes!
1,041 Questions
758 Questions
811 Questions
722 Questions
687 Questions