1997 Honda Civic "change car lights right hand" Questions

change fuse, bulbs, brake switch You have a failed brake lamp relay,this is located at the back right hand in the trunk at the quater panel. check the erth  mabe bet conection black wire from the

...car off does this slop around? when you touch it with your hand? there's a spring in there that that fork clips onto that likes to wear out. when it gets soft it will make noise,, because the forks ...

...hand) cant burn fuel with no compression and spark. well with EFI it cant run right with bent valves either. here is Chad running an engine (any) with no gas tank even his battery is dead. and has ...

...change every thing and cost you a fortune. then find out it was something that just cost a few dollers or pounds. 92 old car. no problem GOT A/C? still? is the AF mix 50% (or what?) over heating. im ...

change over the lights for our bmw z3 roadster convertible as we now have moved from the uk to france and need to change the headlights over from right hand drive to left hand drive to comply with the

...blink at the same time on 2003 Corvette regardless of whether you turn them on for left or right hand turn. The rear signal lights work correctly for left or right hand turn. change the relay

...say and fit tape to the head light to change the direction of the beam the when you return go to the local car breakers or e bay and get a set of head lamps also 1 other thing drive on the left. ...

...FIT MY HAND TO WHERE IT NEEDS TO GO TO CHANGE THE HEAD LIGHT BULBS.. NEED HELP.. THANX Right behind the light there should be 2 clips pull up on those and the headlight will come out to change the ...

...changed the plugs, I'm assuming you changed the wires also? They go hand in hand. Also check to see if the plugs were tightened and threaded in straight. And you could check if they were gapped

...right hand side of motor pops out as car is started, car still runs The plug is possibly stripped in the hole and needs mechanical attention immediately. Have a mechanic put a helicoil in the hole ...