1997 Honda Civic "adjust spring tension allowing 2" Questions

Ad

...tension on the timing belt. Loosen, then tighten the adjusting nut and tighten it to 33 ft. lbs. (45 Nm). Tighten the bolt used to lock the timing belt tensioner. Realign the timing belt marks, then ...

Ad

...adjust if necessary WARNING Do not remove the adjusting or pivot bolts, only loosen them. When adjusting, do not use any force other than the adjuster spring. If the belt is too tight, it will result ...

Ad

Question about Honda Civic

2 Answers

...spring to fully adjust tension. Tighten tensioner lock bolt. 4) Install timing belt covers. To complete installation, reverse removal procedures. Tighten all bolts to specification. See TORQUE ...

...spring to fully adjust tension. Tighten tensioner lock bolt. 4) Install timing belt covers. To complete installation, reverse removal procedures. Tighten all bolts to specification. See TORQUE ...

Question about Honda Civic

1 Answer

...I adjust it to make is right? 1-----wrong belt 2-----wrong routing 3-----brocken tensioner 4-----most newer car have automatic (spring loaded) tensioner you would need to turn to allow belt to slip ...

...Tension The belt is automatically adjusted using a spring loaded tensioner. If belt slippage is suspected or unusual belt noises occurs, the following procedure should be used to determine if the ...

Question about Honda Civic

1 Answer

...2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is ...

Question about Honda Civic

2 Answers

...adjust but I can't locate the belt. You may have a self tensioner which applies belt tension with a spring. Look for a spot to put a 1/'2"drive breaker bar on it and release the belt tension, then ...

...2 inch square opening) rotating it\moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is ...

Question about Honda Civic

1 Answer

...2 inch square opening) rotating it\moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is ...

Not finding what you are looking for?
1997 Honda Civic Logo

1,584 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Honda Civic
1998 Honda Civic

1,041 Questions

1994 Honda Civic
1994 Honda Civic

758 Questions

2003 Honda Civic
2003 Honda Civic

811 Questions

1991 Honda Civic
1991 Honda Civic

722 Questions

1995 Honda Civic
1995 Honda Civic

687 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...