Question about Honda Accord
pull the harmonic ballancer and replace it on a 1999 olds alero? Harmonic balancer has separated but still intact. You would need to use a puller. Looks like a chicken foot on steroids. you should use
...harmonic balancer? If so I cant find holes in the slots on the balancer to thread bolts into to pull balancer off Here is a vedio how to change it.....www.youtube.com/watch?v=RuIislTGOwA Donald, The ...
...harmonic balancer. You can access this by pulling off your tire and the inner wheel well. Then use an air impact preferably a 1/2 inch or 3/4 inch impact to loosen the bolt. Next you will need a ...
Question about Honda Accord
harmonic balancer and had 2 keys. I have a problem at this time that the oil does not pump. I checked the one from the old motor, was hard to turn but did pump, and the one with the new motor was easy
...harmonic Pulley, place the head on and follow the bolt tightening sequence to torque it down correctly and align the cam pulley so that #1 valves are both closed and the #3 intake valve (the valve on ...
...pull the harmonic balancer pulley (make sure to use the proper tool or you will bend the pulley) and the sensor is behind the pulley. you will gain easier access to doing the maintenace buy removing ...
...pull off the crank pulley properly There are pullers available at most of your auto parts stores that will do the job specifically for that vehicle. Autozone rents them and refunds you for ...
...harmonic balance removal tool and utilized the two holes that had the philips head screws. Using the spindle as my center, I applied pressure to the spindle, causing it to retreat back into the hole. ...
...harmonic balancer)(crankshaft pulley).You will have to remove the bolt in the pulley first,to do this.You will have to remove the starter or there might be a small shield where the tranny and engine ...
2,332 questions posted
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,570 Questions
1,470 Questions