1996 Honda Accord "needs replaced low beam light" Questions

low beam does not work high beam is OK but low beam and side light are out...checked fuse, it was OK and high beam works so not the fuse. Assuming just need to replace bulbs but not sure how to remove

...low beam and one for high beam. It's possible both high beam filaments are blown and you just need to replace the bulbs. You can check by measuring the voltage at the high beam terminal. You should ...

...low beam on my 1997 honda accord. It is hard to get out. Which way do I turn? I believe it is counterclockwise. If you get a flashlight, I think there are arrows on the ring indicating which way to ...

...replaced both low beam headlight bulbs on my 2005 Honda Accord. After reading the owner's manual and trying to remove the wheel well inserts (and breaking a couple of those clips in the process), I ...

...low, disconnect wire, disconnect retainer spring, insert new bulb & reverse steps. Takes about 1 minute. Although you can frequently get the existing one to work just by jiggling it, you may want to ...

...replaced the low beam thinking it was burned out. That didn't fix the issue. I took it to a garage and they (after about 4 hours) got it to work. The headlamp worked for 3 or 4 days and then went out ...

...needs to be replaced. Loose connection: The running light circuit may have a loose connection. This could be a result of a damaged wire, a corroded terminal, or a loose fuse. Faulty switch: The ...

...low beam). I can't seem to get the old ones out and I can't seem to find any manuals online. How do I replace them? Thanks for your help! Regards, Josh PS Couldn't find the Holden Viva ...

...low beam light. We had the same car -- the trick is to come in from inside the hood. There's a greyish plastic piece that sticks through the whole headlight assembly (it's the light itself), and is ...

low beam not work !! hi !! my 2001 dodge caravan dont want to light the low-beam headlight !! T the problem is only when i open the lights , but the big -beam is working and the day light too , is ...