1996 Honda Accord "holds wheel car frame" Questions

Ad

Question about Honda Accord

1 Answer

wheel on my 2005 Accord. I think I've identified it as the trailer arm. Is that something I can replace myself? they are usually fairly easy to replace, remove the large bolt that holds the arm to

Ad

Question about Honda Accord

1 Answer

changing cvc joints 1997 accord How to change cvc joints 1997 accord replace the entire CV axles. Support vehicle with jackstands by frame. Remove front wheels. Remove axle nuts. Remove lower ...

Ad

...wheel well and under the car by the splash shield under the engine. All of those will need to be removed. Then you need to remove the turn signal lights in the front bumper with a long phillips ...

Question about Honda Accord

1 Answer

...frame rails are the two best locations for vehicle support. Step 4 Remove the lugs nuts. Inspect the threads on the wheel studs. Step 5 Install the new lug nuts by hand making sure they thread ...

car up on jackstands probably won't give enough room to swing the handle of the wrench you're going to need. Why is it so darn tight? It's a well-known phenomenon called "embedment", where the surface

Question about Honda Accord

1 Answer

...car, remove sub frame after you remove wheels lines, electrical connectors wheels etc. After removing sub frame remove bolts holding converter to flywheel remove bolts holding transmission to the ...

...filter is mounted in the frame on drivers side. two clips hold the lines on and a hose clamp holds the filter to the frame. fuil filter is under shaci between front and back wheel .it has plastic ...

car is a front wheel drive, use two bricks or two 5 inch piece of a 4 inch by 4 inch wood to block the rear wheels. use a hydraulic jack, place it underneath the car, resting on the frame (usually the

...frame (two at back, two in the wheel well). Remove the canister from the frame, mount the new one in the frame and install (reverse the procedure). While you are at it, you should consider replacing ...

...frame just in front of the right rear wheel. Slide under from the other side and soak the fittings with penetrating oil. Loosen the fittings (may be under pressure!) the gas will drip out, Remove the ...

Not finding what you are looking for?
1996 Honda Accord Logo

2,332 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,998 Questions

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1998 Honda Accord
1998 Honda Accord

1,570 Questions

1994 Honda Accord
1994 Honda Accord

1,470 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...