1996 Honda Accord "check flasher fuse" Questions

...it, you should check the wiring for a short. To replace the flasher, simply (may be easier said than done) pull it out of the fuse block. Installation is the reverse of removal. Hope this helps

...check the fuse in the fuse box for signal light, replace the fuse with similar value if it is busted. If the fuse is still intact the problem would be the flasher relay( small cylindrical aluminum ) ...

...(some hondas are located there) or under the dash, driver side fuse panel. Check your fuses, it is more likely the hazard flasher module, or turn indicator switch. I hope this solves your

...check the index,or appendix in it.If you still have problems after replacing the flasher fuse,you may have a bad signal switch in the collum.Also try your hazards.On my truck the hazard signal ...

...a flasher but i cant find where to but the new flasher i bought.Can you help me its in the underdash fuse/relay box , left kickpanel , since you have the new part it should be easy to identify now . ...

...fuse (check your fuse box) or a failed flasher relay which is often mounted inside and under the dash board on the driver's side; it's a cylindrical aluminum can about 2" high and ~ 1 1/2"

2002 Honda Accord. Directionals and 4 way flasher don't work. I've checked the fuses and replaced the flasher under the dash. What's next? Power comes from the battery to the 4 way flasher first then ...

...check when the flasher stops working. So drive yourself to a Hinda service place, take the flasher light bulb out, walk into the parts dept with the bulb and tell them you need a new one (and show ...

...the 2 break lights don't work only the one inside i all ready change the bulbs and nothing change check the fuses then check the flasher fuse if you need any more info go to ...

why do my hazard lights dont work? If you check the fuses, and they are OK, then check the FLASHER units underdahs fuse box. Its possible that go to bad.