1996 Honda Accord "brake switch stopper" Questions

brake light switch, or your stopper for the brake light switch is missing. Check where the brake light switch contacts the brake pedal. If there is a hole, you are missing the stopper, if not you need

...brake light switch located on top of the brake peddle There is a stopper that connects to the brake pedal. It pushes in the brake light switch in when you release the brake. If you look up under the ...

...the washer aligns to the brake light switch and secure washer w/ zipties hope this helps. you need a brake light stop switch. it is located on the brake pedal at the top. really easy to change

...to cause the current problem, but this seems too ironic. Removing the dash was way overkill for that problem. its a 5 minute or less job to fix that. Ck the stopper for the brake switch or

...brake light switch. There is a little plate welded to the arm of the pedal that has a hole with a rubber stopper. The rubber stopper is most likely missing, or damaged. You should be able to take a ...

...kill the battery. Readjust or replace the brake light switch. Check this: Sometimes the small rubber stopper that pushes the switch will wear out and fall out causing the switch to indicate

...switch everytime you release the brake pedal, and that makes the brake lights shut off. your pedal stopper may be destroyed already. (it looks like a push pin) hope it helps. iIhave a 88 honda accord ...

...brake pedal there is a switch connected to it with a plunger to turn on the brake lights the stopper for the switch probably has fallen out you will need to stick a new one in.It is a very cheep easy ...

How to replace the brake switch stopper? A new 1 just pops into the hole on the brake pedal.

...brake pedal that hits a switch. the little plastic piece tends to get old a deteriorate. It's a $3 part you can get at any Honda dealership. You just push the old one out (if it still there) and pop ...