1996 Honda Accord "12mm bolt power" Questions

Ad

...12mm bolt) where it pivots. Then, on the lower front of the alternator, there will be two 10mm bolts visible for the alternator belt tension bracket, loosen the RIGHT one as that will release the ...

Ad

Question about Honda Accord

1 Answer

...install newer door. Also do I need need special tools? 12mm wrench for bolts, 10mm on center stay(holds door open) and if its power you have to run the wiring in and out of the door. Not very ...

Ad

...12mm bolt on the back side of the block (near the balance shaft) a little bit of oil will drip out, this 12mm bolt will allow a long bolt to be inserted into a recessed channel of the balance shaft. ...

...12mm ring spanner and loose the nut of the tensioner which is lower of the power steering pulley in front of the timing belt cover and by using a T-10 tool turn the bolt which is behind the tensioner ...

...12mm and 14mm should be 2-3 nuts, remove bolts(10mm) holding largw power steering hose to gain aeasier acess to alernator. lossen alternator top bolt 14 0r 12mm lossen lower alternator bolt ...

12mm head), remove the belt from the pulley, remove the horizontal bolt through the engine mount (17mm head), remove the 2 vertical motor mount bracket bolts under the poser steering pump (14mm head).

...12mm bolt on the top front of the alternator then loosen the two 12mm bolts on the bottom of the alternator housing after thay are loose you will need to unplug a plug on the back side and loosen a ...

...12mm bolt that extends from the pulley at a right angle. Turn this bolt counter-clockwise to loosen, and clockwise to tighten.  Make sure you loosen the belt enough to easily slip it off the ...

bolt almost fully (Either 10mm / 12mm wrench) Get under the car and loosen the main alterantor bolt using a 14mm wrench. Just loosen enough to move alternator, it is not to be removed. Pull alterantor

...12mm long bolt that mounted across the tensioner rail until you get tension correct. Correct tension is about 68kg. But i do it just to get it nicely tight without too much of sag. REMEMBER DO NOT ...

Not finding what you are looking for?
1996 Honda Accord Logo

2,332 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,998 Questions

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1998 Honda Accord
1998 Honda Accord

1,570 Questions

1994 Honda Accord
1994 Honda Accord

1,470 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...