...tighten them finger-tight. Use a wrench or socket of the correct size. Tighten the shear bolts until the heads break off. Raise the column and install the nuts/bolts. Tighten the nuts to 10 ft. lbs. ...
...tight and we can't break it loose is it a reverse thread or something no engine stated, so any help will be wrong, !!!!!! V6? we cant open hood and look, so we are blind as bats. here. bad input nets ...
...tighten the bolts finger tight first, then torque them up to about 25 ft-lbs. Wait 2 minutes. Then tighten them to about 45 ft-lbs in sequence. Wait 2 minutes. Do it again up to about 55 ft-lbs. Wait ...
Question about Cars & Trucks
...tighten the head bolts using the proper torque (tightness) specifications and pattern. For example, cylinder head bolts for a 2004 Ford Crown Victoria 4.6L must be tightened in six stages: 1.) 30 ft ...
...tighten the short bolts (3, 4, 7, 8, 11, 12, 15 and 16) on the second pass in sequence to 55°. Install the valve rocker arms and pushrods. Install the generator mounting bracket stud. Torque to: ...
head GASKET/2001 cavalier for the 2.2L OHV: (pully 8 4 1 5 9 <-- long bolts @ 63Nm (46ft/lb) side ) 7 3 2 6 10 <-- short bolts / 10 is the stud @ 58Nm (43ft/lb) for the 2.4l dohc are as follows:
...tighten the short bolts (3, 4, 7, 8, 11, 12, 15 and 16) on the second pass in sequence to 55°. Install the valve rocker arms and pushrods. Install the generator mounting bracket stud. Torque to: ...
how many degrees do i tight tha bolt for head angen The head are torqued down in 3 steps (1) tighten to 30nm or 22 ft lbs. (2) torque angle 90 degs. (3) torque angle 90 degs.
Question about Renault Cars & Trucks
...tight. Start with the middle bolt and work out in a spiral pattern. Finish by it ghtening to the correct torque. The torque specifications for the rocker cover on an 08 Renault Master with a diesel ...
Question about Honda Accord
...Tighten the bolt uniformly in several steps. Torque: 8.0 Nm (80 kgf cm, 71 in.lbf) (c) Using an E6 torx) socket wrench, install the engine wire harness protector with the 2 bolts. Torque: 8.4 Nm (85 ...
1,994 questions posted
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions