...lower ball joint from the lower control arm. you must use a ball joint press tool that can be rented at autozone. and a large machinists vise. Normally you can order the lower control arm with a new ...
...lower arm ball joint castle nut, and remove the nut. 15. Install a 12mm hex nut on the ball joint. Be sure that the hex nut is flush with the ball joint pin end, or the threaded section of the ball ...
...Ball Joint - Lower Operation: A joint or connection where a ball moves within a socket, allowing a rotary motion while the angle of the rotation axis changes. A suspension component that attaches the ...
...lower ball joint on my 89 isuzu trooper. I have every thing undone there is not enough space to pull the ball joint out I think you have to slip the axle out of way first to create enough clearance. ...
...ball-peen hammer. Use long pry bar to hold lower control arm down while simultaneously pulling hub/spindle assembly away from vehicle and pushing axle through hub toward transaxle. Go under vehicle ...
...lower ball joint and bearing is good, new tires, noise coming from the right side, steering wheel does not shimmy. ??????????????? Any Ideas?????????? CHECK AIR PRESSURE ALL TIRES Suspension bushings ...
...lower ball joints? Is my first time doing it and I have a basic Idea but I really want to know what is the best procedure and seperator toll I could use besides a press which i have no space for otc ...
accord remove brake caliper and lower ball joint. remove locking nut on spindle. spin spindle around. use your ball joint separator to pop each drive shaft from the transmission. about a 15 minute job
...hope this helps you. the upper ball joint you have to change upper arm to repair. you can only change lower ball joint on accords. go to site for more
1,994 questions posted
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions
