1994 Honda Accord "2 vtec" Questions

...when vtec hits.. its a beautiful thing hit me up with any! honda stuff ive done swaps to my 92 prelude si 2.2l vtec and many more so i know a honda engine and wireing like theback of my ...

VTEC pressure switch 2-pin connector. Check for continuity between VTEC pressure switch terminals. If continuity exists, go to next step. If continuity does not exist, replace VTEC pressure switch. 3.

2.vtec solenoid valve fault 3.vtec pressure switch fault 4. blocked oil passage Whats my next step in finding the exact problem? CHECK VTEC SWITCH OIL PRESSURE.SHOULD BE 50 PSI @3000 RPM FOR THE S2000

...2. The VTEC oil switch is normally closed and grounds the reference voltage from the Engine Control Module (ECM) on the Blue/Black (BLU/BLK) wire. 3. At approximately 4000 RPM, and when driving the ...

...2, you may need to change the Vtec pressure sensor/screen (solenoid),, its located between the Vtec solenoid and the head,, My guess is that your oil is pretty bad, or you just had an oil change, ...

2. Disconnect the 2P VTEC pressure switch connector, and jump its two wires. 3. With the ignition switch ON (II), the PGM Tester should show that the VTEC pressure switch is ON. If the Tester says the

...2.0 vtec se executive car, but it doesn't have a manual, where can I find a online one. i have a honda accord 3.0 vtec and this is what i have Manual it works for me i hope i works 4 u 2 GOOD ...

2.3 VTec engine, 4 cylinder, 5 speed stuck in reverse? My 2000 Honda Accord 5 speed, 4 cylinder, 2.3 vtec engine will not come out of reverse. The shifter moves all over the place but the gear doesn't

2 cars, a 94 accord LX w/ 170K, the engine is so quiet it seems to perfect (its at a dealership). The 95 EX with 122K is not as quiet, has a VTEC engine and is really only loud when I press on the gas

...code will come on. Add oil and reset the light. 2.you might have a bad Vtec oil pressure switch, try replacing it. it is open load fault in the pressure control valve, im from sri lanka, ...