1993 Honda Accord "hub" Questions

Ad

...of wire. Remove the two caliper mounting bracket to steering knuckle bolts. Remove the drive axle hub nut. To prevent the hub from turning, put a pry bar between two of the wheel studs and against ...

Ad

...Remove the wheels Remove the steering knuckle from the vehicle. Remove the 4 bolts retaining the hub unit to the steering knuckle and remove the hub unit. Remove the 4 bolts retaining the hub unit ...

Ad

Question about Honda Accord

2 Answers

how to remove a rear hub assembly bearing on a 99 honda accord 4 cly 2.3. The rear wheel bearing and hub unit are replaced as a unit. With the vehicle on the ground, loosen the spindle nut. Raise the ...

Question about Honda Accord

1 Answer

can't get hub off I AM REPLACING THE STUDS OFF THE FRONT HUB AND CAN'T GET THE HUB OFF. I TOOK THE BIG NUT OFF BUT NOW THE HUB WON'T MOVE. dont take the hub off take off the rotor and the caliper hit ...

finally got hub removed from vehicle, bearing did got come out with hub. do i have to buy new bearing and if so, do i have to have them pressed onto the hub? the bearings generally have to be pressed ...

Question about Honda Accord

1 Answer

...ABS sensor has to be replaced. I have a new sensor installed right up to the bolt removed @ the hub. Question: How do you remove sensor from hub? It appears to be stuck & won''t move... WD 4 it? ...

How do i remove the front hub on my 1999 accord so i can replace the lug stud Some hubs have a sweet spot to change the studs If not you'll have to press out the bearing by removing the tie rod,ball ...

Question about Honda Accord

1 Answer

front left rotor wont release. axle nut is removed hub will not slide The following might help you. It is the rotor removal process for your car, most of which you have apparently done: Loosen the ...

...from the vehicle. Please refer to Section 8 for procedures. Remove the 4 bolts retaining the hub unit to the steering knuckle and remove the hub unit. Fig. 4: Remove the 4 bolts retaining the ...

Question about Honda Accord

1 Answer

trying to get outer hub off of a 93 honda accord You will need a slide hammer with an adapter to fasten to the hub flange. You can rent them. It works more easily if you remove the bolts that hold the

Not finding what you are looking for?
1993 Honda Accord Logo

1,848 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,998 Questions

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1996 Honda Accord
1996 Honda Accord

1,636 Questions

1998 Honda Accord
1998 Honda Accord

1,570 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...