wide) putty knives can be used. Flat blade screwdriver is the last resort. Once the door panel is off, check the other ends oif the link rods you just took off. If one isn't connected, bingo. If it is
...wide, bent 90 degrees) on each headlight that you pull up and it will release the headlight. im not completley sure on Civics but if there are no tabs then look for 10mm sheet metal bolts going ...
...wide, bent 90 degrees) on each headlight that you pull up and it will release the headlight. im not completley sure on Grand Prix's but if there are no tabs then look for 10mm sheet metal bolts going ...
...goes off, if it doesn't click BOTH times then it is your problem #2 it is held on with a 10mm bolt at the top of the relay. ps it will be pretty big for a relay about an inch thick and two inches ...
...wide plastic molding strip that runs along the interior side of the tail light. This can be pried off carefully without breaking the plastic clips that hold it in place. Using a 10mm socket, remove ...
...10mm) wide by 5 / 16 (5mm) thick bead of RTV sealer to the oil pan at the front crankcase cover sealing surface. Then apply a 1 / 4 in. (6mm) by 1 / 8 in. (3mm) thick bead of RTV to the crankcase ...
...wide shield). Unscrew the center Toyota plastic logo, then unscrew the 3 allen key nuts in front (5mm - and use a magnetic allen key or risk dropping one of the nuts down into the bowels of a crevice ...
3,428 questions posted
Usually answered in minutes!
2,998 Questions
1,631 Questions
1,636 Questions
1,570 Questions
1,470 Questions