...shut. Most of the doors had a small plastic cap which you pry up and below that cap is a screw which you remove with a # 6 phillips screw driver (that is the most common size phillips used) Once the ...
down your vin # (mine was on the car inside the drivers side door) then pop off the cover of your radio with a flat head screw driver. After that, there are 4 phillips head screws holding the radio in
...phillips head screws along the front of the top of the bumper cover take these out,,,,now remove both front wheels,,remove the bolts that hold the inner fender liners inplace there are some in front ...
...pops from preasure from the new rad. On the + side your car dose not require to much in way of tools. i have done alot of them. ill give you a parts list and a tool list at the end of telling you how ...
...Phillips head screwdriver and holding a plug wire away about a 1/2 inch while turning it over check that the wires and coil wires are attached and didn't pop off this is where i would start by ...
...pops off but still be careful not to force it or you will break it. No need to unhook the wires once it is off. Just let it hang to the passenger side out of the way. 2. Hook your battery up if ...
3,428 questions posted
Usually answered in minutes!
2,998 Questions
1,631 Questions
1,636 Questions
1,570 Questions
1,470 Questions