...persists then the problem can be on the instrumental panel itself. Look for burnt tape circuits for this can be the cause of the issue. Hope this helps and thank you for using FixYa! Have a good
tape. If not, look behind the kick panel because they get placed behind this panel.These cars are very bad about the TCM failing. If you get no flashes when you jump this connector but the light is on
Question about Honda Accord
tape. If not, look behind the kick panel because they get placed behind this panel.These cars are very bad about the TCM failing. If you get no flashes when you jump this connector but the light is on
tape. If not, look behind the kick panel because they get placed behind this panel.These cars are very bad about the TCM failing. If you get no flashes when you jump this connector but the light is on
...tape for use of the factory installer/QA Inspector. If still in the car, it would be in the general area of the glove compartment; inside, on the wall, on the inside lid/cover, underneath. Of course ...
...the discharge and suction hoses. replace the o-ring of the hose and you could use teflon seal tape as additional for thorough sealing of hose joints. hope that helps you out! Thanks for using
Question about Honda Accord
tape. If not, look behind the kick panel because they get placed behind this panel.These cars are very bad about the TCM failing. If you get no flashes when you jump this connector but the light is on
...FixYa. there is a little plug that goes into the brake pedal arm where the brake lights switch is supposed to hit ,and this plug has fallen out. you will see a hole in the brake pedal arm and the ...
...TAPE or otherwise anchor the harness so it DOES NOT fall into the door panel. Now there are three 10 or 12 mm bolts to remove. After removing two just loosen the last one up a bit so you can support ...
3,428 questions posted
Usually answered in minutes!
2,998 Questions
1,631 Questions
1,636 Questions
1,570 Questions
1,470 Questions