1991 Honda Accord "change side light" Questions

2. One on each side in the smaller of the 2 rear tail light lenses. In order to change the module you have to remove the smaller of the rear tail lights. Drivers side is 5 pin. Passenger side is 6 pin

...side would not be working if you put ignition on and press brake your brake light shoul work ? if so change the bulb as the bulb has two elements inside tail light and a higher wattage element for ...

...side but not on passenger side. How can I fix it myself. Please don't answer change your light bulbs, I already did that. check wire connection and check for power to high beam side repair as ...

...side). The module in question is located inside the smaller of the 2 tail light sections. In order to change the module you have to remove the tail light. There are 4 nuts holding in the taillight ...

...side) that you can push to turn on / off and which also come on when you open the door, like any other dome light. However, since these are ''push to turn on'' they are not light most other dome ...

change the automatic transaxle fluid and the light dosen´t come off. Check the TCU or TCM located passenger side floor area. when you take it apart it will have bad soilder connection on the left side

Break light on Driver side is out. How do I fix Break light on Driver side is out. How do I fix it change the bulb

side works great. need help. is the right rear turn signal doing the same if so it may be the turn signal switch first check pass rear light for proper ground connection...if good and problem persists

...side airbag was deployed so i change the airbag, computer, seat belt so i try restarting the light and the airbag light comes back so i try reading the code and it 8 Internal failure of SRS unit ...

my rear running lights dont work even after i changed the bulbs and the fuses after changing fuses and bulbs my rear running lights wont work Are the side markers and license bulbs working?