BELT TENSION BY LOOSEN THE POWER STEERING PUMP BOLTS AND TURN THE TENSIONER ADJUSTING BOLT TO TIGHTEN OR LOOSEN THE DRIVE BELT.IF YOU HAVE THE AUTOMATIC BELT TENSIONER.EITHER YOU ARE GETTING THE WRONG
Need to adjust drive belt tension on 6 cylinder 96jeep How do I adjust drive belt tension on 6 cylinder 96 jeep? it should have an automatic tensioner if belt is loose then it needs to be replaced
...can't find the tensioner pulley is because you do not have one...The power steering pump is used to tension the belt. loosen it up and slide it. (some have an adjustment screw underneath to
...Belt and Holds Tension on it. You will need to get a Wratchet, Socket, and Cheater Bar. Turn the Bolt On the Top Large Pulley with the Wratchet and Cheater Bar. This will Lower the Smaller Pulley So ...
...tension on A Fan Belt On A Jeep cherokee 96 That depends on which engine you have. On v8 engines you need to put a wrench on the tensioner pulley and pull it over. On six cyl and four cyl engines ...
Question about Honda Accord
...pulley arrangement that most 4.0 engines have that pulley is an idler not a tensioner. Your power steering pump has a pivot bolt, and a slide under the pump. You adjust belt tension using the
...tension on serpentine belt I need to release the tension on the serpentine belt of my '95 Jeep Grand Cherokee Laredo, in line 6. Where is the tensioner release located? the 4.0 didn't come with a ...
...tension of the belt by using a ratchet or belt tool on the tensioner pulley to take pressure off the belt, or loosen the adjusting bolt if that is what you have. The new belt must be routed correctly ...
...running. there is noway to adjust tension. either the belt is coming apart or the tensioner is. if the tensioner is crooked, replace it. this is most likely. the tensioner itself is spring
3,428 questions posted
Usually answered in minutes!
2,998 Questions
1,631 Questions
1,636 Questions
1,570 Questions
1,470 Questions