1989 Honda Prelude "engine block" Questions

...block on any engine. it's a indented circle piece of metal that is press fit into the block along the water jacket so that it ill bust if the coolant freezes rather than busting your ...

...on a 1988 honda prelude si with a 2.0 fi engine dual overhead cam well get on with it its not difficult,jack under engine with a block of wood on it ,take weight of engine and then change ...

...engine block or on the cylinder head. Normally, it is a sealed unit that cannot be repaired. * It should be inspected for fuel leaks. * If gasoline is leaking at the line fittings, these fittings ...

looks like its coming from between engine block and oil filter mounting plate just behind front crank pulley, I think its front main seal? Yes, I think you're right that it's the seal that is leaking

...engine with SH h22a4 on base transmission, the intermediat shaft doesnt fit on the block of the engin, i custom made a metal plate to be as a pacer to make it fit, is there any other way to make it ...

...a 1989 auto engine was put in a 1988 manual shell may need to swap the computer also.. manual computer is different..but yes.. be looking into any vacuum leaks..block off any open ports you

...block, rear left of engine, adjacent to the timing belt cover. I wonder if this may be a common problem that anyone could advise upon?! Despite the product details (not enough choices) its a 1997 ...

freeze plugs where can I find the freeze plugs on a 1991 honda prelude si, usually the freeze plugs are located on the engine block underneith the heads.

...don't want engine to get hot. a stretched block, and you need a new engine. White smoke can (and does) come from coolant burn off in the oil due to a leaking or blown head gasket or cracked head

...engine surges. from normal idle to 2100 rpms back and forth. what to do to correct problem. i have already changed out the idle air control valve. There is a warm up valve on the throttle body(should ...