1989 Honda Prelude "clutch slave cylinder won 39" Questions

...or yours can be rebuilt with new seals. Save time and money and buy a rebuilt or remanufactured unit. Once installed, you bleed the system down at the clutch slave cylinder, mounted on the

...clutch is new and the slave cylinder also it's been bled. Will shift but wont go into any gear including reverse. Any ideas? Have you just replaced the clutch? Taken out the transaxle, and put it ...

...a new clutch kit in my truck.I didn't do anything to the slave cylinder except remove it from the tranny.... now it won't work. What went wrong? Try bleeding the air out of slave ...

...slave cylinder; If it is leaking from the master cylinder, replace the master cylinder, etc. Fixing just one part of the clutch may not be the best option for you however. Clutch parts seem to wear ...

...slave cylinder.  Keep topping up the clutch master cylinder so it won't run dry.Post back if still having problems.  There is a tool at auto parts stores for pressure bleeding brake ...

clutch slave cylinder wont come up to presure i have bleed the master and slave cylinder after replacing the kits in both but the pressure keeps going away. when bleed there will be clutch there but 2

...slave cylinder,you say your clutch pedal is stuck down,when the slave cylinder goes bad,it won't hold pressure, causing pedal not to spring back,it says you have to remove transaxle to get ...

t disengage depends on what type of clutch meaning with or without slave cylinder. if with, slave cylinder could be bad or out of fluid. if without, throwout bearing and possibly fork could be damaged

...clutch.  (The slave cylinder pushes the clutch fork lever which pushes the release bearing forward on a shaft up against the clutch pressure plate to allow the clutch to operate  .If the ...

...clutch slave I need help asap Ok Matt,I got you covered,when your clutch master cylinder goes empty,your clutch slave is leaking and not holding pressure,you can fill reservoir and bleed to get you ...