...the tensioner. If the water pump is located under the timing belt cover, replace this at the same
...could you please go through the re-timing stages for me and which marks I need to use to re-time, thank you. there wil be a mark on your camshaft, alternator, igniton coil and driveshaft and ...
where is the thermostat located in 1993 audi 90, can i have picture It is located on the front of the motor under the timing cover, behind the timing belt. Usually this is replaced along with the ...
need timeing marks locations for 1993 audi90cs you havent stated what model engine ?? so iam assuming its ???? if so then the timing mark for the cam is a little plastic bit sticking up ,look not sure
where is the thermostat? 1993 Audi 90 2.8L SFI 6cyl - Thermostat: is located on the front of the motor under the timing cover, behind the timing belt. Usually this is replaced along with the timing ...
...stripped down and the belt ready to put back in, it to turn the cam to isolate 1 cylinder at a time close the valves on the cylinder, then put a compression tool on it and turn the crank, if
need a timing belt diagram for a 1993 audi 90 quattro please hlep I am not sure if you have the 90 or the 90 Quattro. Click on the below Links. The first Link is all the Diagrams on the Timing Belt ...
timing belt when the timing belt slips does it automatically bend the valves in a 1993 Audi c 90 series V6 no it is still fixable...the valves should be fine
1993 90: 1993 water pump location... 1993 water pump location Water pump sits in the front of the engine top centerline. Look just below the coil pack. It uses the timing v-belt for operation so it ...
timing marks for 1994 audi 2.8 v-6 the "timing marks" on audi"s are on the cam sprockets. large holes on the lobes of the camshaft gears are supposed to face each other when cylinder 3 is at TDC the ...
41 questions posted
Usually answered in minutes!
86 Questions
75 Questions
34 Questions
26 Questions
26 Questions