engine detects a fault rather than the requirement for a service. If a service was required the service light would display for 2 minutes after turning on the ignition. The car has an underlying fault
...01 changed water pump and thurmostat and still over heating and running hot any ideas Try to flush and fill with new fluid to get the passageways free of sediment. Or, try to see if the fans are ...
...01 . Remove radiator cap (8100). Raise vehicle on hoist as described in Section 00-02 . Remove radiator splash shield. Drain engine cooling system as described in this section. Remove the radiator ...
...01 . On 3.0L (4V) engine remove cowl extension and right side of leaf screen. Disconnect engine control sensor wiring (12A581) from heated oxygen sensors (HO2S) (9F472). Do not remove harness ...
...01 . On 3.0L (4V) engine remove cowl extension and right side of leaf screen. Disconnect engine control sensor wiring (12A581) from heated oxygen sensors (HO2S) (9F472). Do not remove harness ...
...01 . Disconnect engine control sensor wiring connector from camshaft position sensor. Remove camshaft position sensor retaining screws and camshaft position sensor from camshaft position sensor ...
...01 . Raise vehicle on hoist. Refer to Section 00-02 . Install lower nut on front engine support insulators and tighten retaining nut to 88-119 Nm (65-87 lb-ft). Install lower nut of rear engine ...
...01: Engine, 4.6L (4V) 1997 Continental Workshop Manual IN-VEHICLE SERVICE Oil Pan/Oil Pump Screen Cover and Tube Removal Turn rear suspension leveler compressor switch (5K761) off (located in luggage ...
01-07-30-023A (Section 07 -- Transmission/Transaxle). Condition: Some customers may comment on a harsh 1-2 upshift and the Check Engine Light or Service Engine Soon indicator is illuminated. Diagnosis
451 questions posted
Usually answered in minutes!
587 Questions
551 Questions
185 Questions
78 Questions
84 Questions