1999 Volvo S80 "gear solenoid" Questions

gear selected is wrong for the settings in the cpu. This means that the shift solenoid is not working properly and/or the TR sensor /switch is faulty. I would go for the sensor as it probably controls

solenoid. It's actually locked in hi gear. It can be reset, but once it hits hi gear, it will lock again. There are temp (cheap) fixes, but fixing it right dictates that you replace all 4 solenoids in

...gear. This is because solenoid S2 is stuck in open or closed position. Diagnostic Codes:    000C, 002A, 002B, P0733, P0734, P0756 Tests/Procedures:1. Clear codes from the Transmission ...

Solenoid's pinion gear is stuck. Have someone hit (not too hard) the starter while you try to start the car. This usually works by dislodging a stuck pinion gear. ·Make a simple test of the alternator

...solenoid on the gear shift to stop you moving whilst the car is put into drive if the switch is not working correctly it won't release the solinoid to release the gear shift or the soinoid is faulty ...

...will not shut completely off Try to play with gear shifter , back and forth from P to D. Sometimes P lock solenoid will not disengauge , which prevent the key to turn all the way back to 0

tranny do not shift into third gear with a signal indicating tranny needing service check the shift solenoid and the vehicle speed sensor with a voltmeter one is broken or malfunctioning

...this be the shift solenoid? Or with A/C on, is the car drawing too much power/trans slipping. If so, why only in 3rd gear? Please help!! Thanks!!!!! Benjamin valve body or the 3rd gear clutch is ...

...gear. This is because solenoid S2 is stuck in open or closed position. Diagnostic Codes:    000C, 002A, 002B, P0733, P0734, P0756 Tests/Procedures: 1. Clear codes from the Transmission ...

...gear then straight back to 1st. the codes read solenoid failure or open circuit to solenoid. can anyone point me in the direction of where to start looking please? has anyone else had the same ...