...that the light sets in memory. The most common problem is the individual wheel speed sensors, but they are expensive so a trouble code test is the best way to go, then u can do the actual
...ABS) module to find out which one is causing the light to come on.As far as cost...it depends on exacltly WHAT it needs and WHO is doing the job. There also may be more than one speed sensor giving ...
...test. Typically a bad wheel speed sensor will cause this. If the light comes on when you start it, goes out shortly after, but comes on after driving for a little bit than the problem may be a little ...
...test is run at 4 mph regardless of brake pedal position. The system has 3 speed sensors,one on each front wheel and one in the rear end housing. The one in the rear end housing usually causes the ...
test. Repairing the problem will turn out the light. If it comes on for a couple seconds when you start the car then goes out until you start to move than there is likely a problem with a speed sensor
test makes all kinds of noise and messes with the brake pedal temporarily. Everytime I get down to the end of my street it went off, scared the **** out of my teen drivers. Now the only annoying thing
...test for the speed sensors that measure the resistance of the sensor, if there is you should be able to measure the opposite wheels and figure out what it should be. The best way to figure out what ...
Question about Cars & Trucks
...do my best to answer them. Thank you for using FixYa.com! I agree with other expert, you need the ABS module tested for fault codes, it is very likely this is a wheel speed sensor signal
test during the initial start up. The usual cause for this is a bad wheel speed sensor. The best thing to do is start by scanning the ABS module to see what code(s) are present. Once you know what the
730 questions posted
Usually answered in minutes!
353 Questions
227 Questions
191 Questions
166 Questions
75 Questions