1995 Volvo 960 "back down put seats" Questions

...back up after car slows down. Sound like a fuel filter problem? It sounds like a fuel problem as opposed to an electrical fault. Start with the easiest fixes first .. The next time the car comes to a ...

...down with gas , and do to that lost compression, you will need to pull the plugs , put some oil , just a bit and let it seat for a minute , then put the plugs back and try starting , I assuming that ...

...back half of the timing cover there should be a portion which projects down toward the bottom of the engine. It will drop about an inch or so down before ending and just leveling out and running ...

...down in the back to put a long table in the cargo area. I am only able to get the passenger side seat back up again. Can anyone let me know how to get the longer side back up? Putting them down is ...

...back seat down, please help me. Should i just bust the ****** off and hope for the best? or just bodyslam myself into the backseat untill it snaps and goes down. Please help me!!!!! The best thing to ...

...back seat down in a 97 Mazda Protege I want to put my rear seat down in my car so that I can put things like skis in my trunk but I can't seem to find a leaver or button to do so. Can anyone describe ...

...down in back seat of Tundra double cab truck need to put seat cove s on back If its the current body style that the rear seats do not fold down. The seat can be removed by removing the nix bolts that ...

...back down it won't latch back into place and let me put the seat back up. What do I do please? Question edited for clarity. Question moved from Spanish car company Seat (pronounced See-At). It seems ...

...down and will not come back up. What can I check to fix this cuz I can't drive without support for my back. I bought the car used and the back of the driver seat was up when I purchased it. My ...

...to put nut on front left bolt. It goes up & down, forward & back. Just not as far as before. pull the seat adjuster lever and gently tap the runner with a small hammer so it move into position ...