1994 Volvo 940 "driver door lock working 2008" Questions

...egr valve? on a 1994 volvo 940 wagon? Chrysler sebring 2008 drivers door wont open all central locking including drivers door working and all doors working except druvers door remains shut any ...

...with this year model. I experienced the same problem with my 2008 Silverado. Driver door lock stopped working so I replaced the actuator myself to save the $95 per hour labor charge from the

driver's door panel. Any help? The driver's door normally contains the central locking module and also the solenoid that opens and closes the lock for that door. That doesn't explain why the passenger

driver side door or dead as a door nail. When I press my key fob lock the doors will lock. Power window button on the passenger side works, the sliding door buttons and the trunk button work Check the

...driver's door bends the wires back and forth until they work harden and snap. This issue ONLY happens on the driver door. Once you get inside there, you can check with a multimeter and replace that ...

...driver side only not passanger but can lock doors when car in park, not while car in motion. keyless remote works fine. car locks putting car into gear and unlocks when car in park. car will however ...

driver front and rear won't open or lock. each door has there own door lock solenoid, the only thing they have in common is one fuse, either they all work or none of them will work. So I would say the

...driver side door the alarm goes off. Any help would be so appreciated. It could be the power lock motor. You could have a short or bad wiring harness. Might just be a fuse that connects to both. But ...

...driver's door. It works fine on the other 3 doors, the tailgate, the tailgate window and panic. more than likely the lock solenoid in the driver side door is not working. it located near the latch ...

...driver door, now is not working for either. The passenger power lock button still works for the passenger door but not the driverside door. I replaced the fuses and it still does not work. Any idea ...