1993 Volvo 850 "cam" Questions

...the fire is going to the ingition coil but not out the ing. coil what could cause this if its the cam position sensor should it have stalled out a few time or something the car always ran good i ...

...at the coil going to the distrubater,but no spark at the plugs. and no power at the injectors CKP. Cam Position Sensor. Needs crank and cam sensor signal to work. Need codes pulled at diagnostic

...bolts to the driver side end of the Engine. Then pull the cover off the same end of the exhaust cam. The sensor will be screwed into the cover but you want to clean the inside as well before ...

...to the Ign ECU. Also When The Battery Is almost Zilch the car tries to start. check or replace the cam sensor, this sensor sense the turning of the cranksaft by sending info to ECU telling ecu to ...

...sensor (that goes bad when hot but ok when cold). It could also be 3-1-4 or 3-2-4 witch is the cam shaft position sensor. I had the change them both last year. The cam sensor doesn't always log ...

volvo 850 cam timing At #1 TDC both cam pulleys will have a mark that lines up with marks on the top of the Timing belt cover. They will point straight up.

Fitting cam shafts on Volvo 850se 1994 20v 2ltr Im trying to align the pulleys with the cam shaft but ther are no visible markings to line them up. Help!!! There is a special tool that mechanics use ...

I set cam and crank timing but no comp. No bent valves! Note, #1 piston no at tdc.at mark. Is one toth off. I have run into this before . Volvo wants you to buy a special tool to properly set these ...

How can i find were the Cam Position Sensor is located and what it looks like. Your CPS is under the hood, on the driver's side, upper engine area and is mounted on the cylinder head. Here's a photo ...

ive been trying to set the timing on a 95' volvo 850. first replaced water pump 2 days before. finances kept me from replaceing any addition componants at that time. now im paying for it. the belt ...