1989 Volvo 240 "lubricate clutch cable" Questions

clutch pedal to catch drips. Look for fraying cable at the bottom end of the cable. Failing that, you can try replacing the cable with a quality (i.e. not made in China) replacement cable. It is a bit

...lubricate it you can get good cable lube at any motorcycle shop. If the cable appears good gently move the clutch form back and forth to feel for any binding or to see if you hear your noise. If you ...

...Lubricate the inside diameter of the bearing with clutch bearing lubricant GM part no. 12345777 or equivalent. Install the actuator cylinder in the transaxle, then install the transaxle assembly. ...

...lubricate the clutch? could you possibly tell me where it is or would be? thank you On your model you most-likely have a clutch cable, therefore no clutch fluid. Follow along the drivers-side under ...

...clutch cable flywheel checked and ok. All seems to be ok with gearbox. Still can't get gears engaged when started. Clutch cable not adjusted properly , worn clutch fork or ball , pilot bushing in the ...

...clutch pedal ) won't move then there's your problem. You may be able to lubricate it for a temporary fix but ultimately you need to replace it. If the cable moves fine as well as that arm then you ...

...clutch cable? i have heard about the cable running close to the exhaust which dries out the lubrication for the cable could this be why the revs shoot up? thank you its deffintly the clutch as these ...

...clutch cable is seized and needs lubricating , or the pressure plate teeth on clutch plate housing have broken , maybe from sitting for so long or improper fitting years ago , maybe also your clutch ...

Clutch Cable Issues (if applicable): If your Fortuner uses a mechanical clutch linkage with a cable, the cable could be stretched, frayed, or damaged, causing increased resistance in the pedal. Clutch

...clutch and will only require that you lubricate all the moving part of the pedal and make sure all the bushings are in place and have not worn threw good luck and please rate -Jeff Where would the ...