how do i remove the distributor Turn the engine to #1 TDC Compression. Remove the cap and note the position of the rotor. Undo the wires connected to the distributor. Undo the clamp that holds the ...
1984 240 SW. Why is engine knocking loudly? was sitting for many years. Replaced fuel pump, distributor cap, and spark plugs. Flushed gas tank Good start, but be sure to double check the firing order?
im not getting spark ive replaced the distributor the cap and the rotor all the plug wires spark plugs coil ignition switch and still nothing what could the problem be anyone know??? im thinking its ...
...and does not start Problem - 1990 Volvo 240 Changed the 25 amp inline fuse (did not appear blown); distributor turns; considering distributor cap and rotot or solid state points (ignition) car has ...
distributor cap rotor change Unable to pull out the distributor rotor. Should I just break it? yes
1991 volvo 240 distributor doesn't turn when engine is cranking. My 1991 volvo 240 had the earlier problem of no spark at plugs but spark out of coil, found out distributor is not turning while engine
...spark plug no need to remove one from engine.Make sure you have a good 12v source of power to the distributor.Is your distributor electronic?should be but if points based instead you may find its ...
...it then get the Bently manual from IPDUSA.COM could be the egnition coil, remove the wire from the distributor and put it close to a piece of sheet metal and turn ignition, without holding the metal ...
Question about Volvo 240
...shaft and crank shaft pulley and idler pulley on their marks. my question is , if I need to move distributor, rotor does not align with shaft mark on distributor. no you check the tip of the rotor ...
154 questions posted
Usually answered in minutes!
223 Questions
114 Questions
108 Questions
78 Questions
116 Questions