...passenger side. I am sure you guys have something like Canadian tire down there you might even try Wallmart. Under the dash behind the glove box(remove glove box)there is a vacuum connector with ...
...passenger air bag off light did not light up. I was skeptical, but tried your advice and it worked. Parts: 1) 12-volt colored lamp (Radio Shack part: 272-1099) Tools: 1) socket set 2) philips head ...
...Remove the Instrument Panel (IP) compartment (2) Release then unlock the IP module connector (1). Disconnect the IP module pigtail. Release and unlock the driver and passenger seat module connectors. ...
Question about Oldsmobile Cars & Trucks
remove the Connector Positive Assurance (cpa) lock from the yellow 2-way sir harness connector at the base of the steering column, then disconnect the connector. ARMING If equipped, connect the yellow
...Remove the steering columnRemove the passenger side air bag modulePosition the speed control servo aside. Remove the nuts.Position the speed control servo aside.Disconnect the LH bulkhead connector. ...
...passenger compartment. Disconnect the wires from the instrument panel at the right and left cowl sides. Remove the 2 lower bolts retaining the instrument panel to the A-pillar. Using the steering ...
...remove the passenger side front tire and pull the rack out through the tie rod hole. Generally you would have both fron tires off anyway because you have to separate the tie rod ends from the struts. ...
...passenger air bag is a metal plate with two or three bolts in it remove the bolts and it will free it. once the dash is out to remove the heater box disconnect the evap core and heater core then ...
625 questions posted
Usually answered in minutes!
689 Questions
627 Questions
646 Questions
540 Questions
534 Questions
