1997 Mercury Mountaineer "ignition locked" Questions

Ad

...2001 lost keys how to program it Programming Instructions: 2001 Mercury Mountaineer. 1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks

Ad

Question about Mercury Mountaineer

2 Answers

horn will blow or all four locks will become unlocked. TRY THIS REPROGRAMMING PROCEDURE. SWITCH THE IGNITION OFF TO ON 8 TIMES WITHIN 10 SECONDS. DOORS SHOULD LOCK THEN UNLOCK. PRESS ANY BUTTON ON THE

Ad

Question about Mercury Mountaineer

1 Answer

...The passive anti-theft system (PATS) contains the following components: theft indicator encoded ignition key PATS transceiver module powertrain control module (PCM) standard corporate protocol ...

how to program new keys after replacing the ignition on 2004 mercury mountaineer replaced the ignition,need to know how to reprogram the new keys Sorry , but it is a dealer item or a locksmith( call ...

Question about Mercury Mountaineer

1 Answer

...to find out is to sit in your vehicle on the drivers side. lock all the doors, stick the key in the ignition and turn it to the on position without starting it then to the off position 9 ...

1997 mercury mountaineer lost onnly key.. ignition key code location? i lost my key. where is the ignition key code located? local key shop said drivers door lock. is that correct? I think if you call

An 09 mountaineer won't start everything comes on lights displays etc but won't crank I've replaced ignition switch battery and terminals Starter will be next but wanted to see if there were any ...

Question about Mercury Mountaineer

2 Answers

...locked up. How do I fix it? have you tried pulling the steering wheel to either side as you turn the key and then wiggling the steering wheel back and forth Try turning the wheel first of all and see ...

Question about Mercury Mountaineer

1 Answer

Ignition locked. Cannot start. Must move steering wheel hard and multiple times to turn key. Check under the dash by the brake pedal. There is an interlock switch which can be kicked by feet swinging ...

Question about Mercury Mountaineer

1 Answer

...send the electrical signal to the starter. So, that would indicate a mechanical problem with the ignition lock cylinder itself. It will need to be replaced. Since you didn't post any detailed ...

Not finding what you are looking for?
1997 Mercury Mountaineer Logo

569 questions posted

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...