2000 Lexus RX 300 "signal light" Questions

Ad

...for fuse or int. module position Parking lights are not working, headlights, brakes and turn signals are fine. This hapened after accidently I made a short on rear left parking light line. ...

Ad

...signal is in bumper). Whether you reach from under the vehicle or under hood, simply grasp the clip and turn in a clockwise or counterclockwise direction. Usually the clip is attached to the light ...

Ad

...light comes on VSC means Vehicle Stability Control. It comes on when the sensor send a signal that the vehicle is not stable on the ground.....check the wheel balancing and alignment and the air ...

...signal light up on the dashboard and on the outside lights. What would cause this to happen? the bulbs may be installed incorrectly or partially burned, it could be a loose ground wire on the brake ...

...light is on it is to signal you that a fault has occurred in the Vehicle Stability Control system and the computer control module has switched it off. In order to get the light off the system must be ...

...signal bulb on the side of the front bumper? You will need to loosen the bumper cover clips below the bumper and inside the fender liner and possibly where they attach to the grille. By loosening ...

Question about Lexus RX 300

1 Answer

light on with code P0301 cylinder 1 misfire. The spark plugs and ignition coils were already replaced. I swapped fuel injectors with known good cylinder and still have same code. Compression check was

Question about Lexus RX 300

2 Answers

...has anyone had this problem? The check engine light has nothing to do with the oil, water etc. it signals that a fault has occurred in the engines electronic controls and it has failed a test of ...

...light went off and I was told that if it goes on again I will have to replace two sensors for $650 and if this doesn’t fix it they will replace transmission. Next day I got the same problem, heavy ...

Question about Lexus RX 300

1 Answer

...light is on with VSC and ABS. The car surging "RPM" The code is sensor says Camshaft sensor to be replaced. I have replace the camshaft sensor, Idle Air Control Valve all 3 O2 sensors in the past ...

Not finding what you are looking for?
2000 Lexus RX 300 Logo

548 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Lexus RX 300
1999 Lexus RX 300

449 Questions

2001 Lexus RX 300
2001 Lexus RX 300

362 Questions

2002 Lexus RX 300
2002 Lexus RX 300

149 Questions

2003 Lexus RX 300
2003 Lexus RX 300

108 Questions

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...