OBD2 reader to the connection point and start your diagnostic. It will then read back to you what codes the ECU is reporting. You then look up the codes online or through an autoshop and they can tell
...why is there no response from obd2 scanner when connected to my 2003 ford escape but when connected to other car gives me response. try another scanner your car may have a different mode in its
...nevative battary lead 4 5minutes thn connect nevative battery lead n try tht 50-50 Obd2 has a fuse need to replace it if the fuse is ok you have a bad ecu dianostic part of computer could be ...
Help" tester?? Use an OBD2 sacnner and read to DTC? Why did you unplug or R/R the ECU in the first place. With just the information you provide your problem might be in the wiringharness or a bad ecu.
Question about Lexus Cars & Trucks
...obd2 pluk to 1997 lexus 1uz vvti ecu ill need to no wer the 16 pin wiaers are connect to ecu The connector will always be in or very near to the driver's footwell. The most common place is tucked up ...
...obd2 reader to my laptop and play with the ecm OBD DIAGNOSTIC LINK CONNECTOR / 1995 Honda Accord 2.2L MFI 4cyl The OBD Diagnostic Link Connector is located: Front seating area, driver side, driver ...
Question about Toyota Cars & Trucks
...obd2 pin out on a 2006 toyota 4 runner sr5 4.7 ,looking for the ts pin for zero point calibration The obd port is the diagnostic port connection and wont have what you are looking for. You want the ...
Question about Ford Cars & Trucks
...a scanner code C.A.N. OBD2 on a 2010 Ford Escape mean? means there is faults and need reading on a code scanner, obd2 is the connection can is the what the ecu uses for memory and fault
...ecu but it still does the same thing. All the gauges work tach, oil pressure, alt, and water temp. I also used the fuel tank and lines from the 96. Since it sounds like you also carried over the OBD2 ...
548 questions posted
Usually answered in minutes!
449 Questions
362 Questions
149 Questions
108 Questions