...connect your OBD2 reader to the connection point and start your diagnostic. It will then read back to you what codes the ECU is reporting. You then look up the codes online or through an autoshop and ...
Question about Dodge Cars & Trucks
...question Best way to check power to obd2? 1997 Dodge Ram 1500 5.L SS/T 4x4 Sport No power to OBD2 Connector Check Engine light came on after jump starting truck last night (driver error - battery ...
Question about Lexus RX 300
...obd2 not connect to my car after i plug it in it said it cant connect 1995 pontiac firebird 3.4. When ever I plug it in it said it cant connect. OBD1 1981 thru 1995 OBD2 1996 thru 2014 You should not ...
...Hi there rickadams49! The reason you are unable to connect the OBD2 to your Ford is because your truck is OBD1. Before 1982-1995 is OBD1 and 1996-present is the OBD2 system. I hope this helps you
Question about Lexus RX 300
OBD2 adpater connected to 2005 Lancer, having error 104 : Error detecting OBD2 protocol. How to solve this ? P0104 Mass or Volume Air Flow Circuit Intermittent---------Chear OBD2 code scanner
...shows the change in the sensor return voltage as the sensor's resistance is changing. If you have connected everything properly, when you crank the engine, you should see the check engine light ...
Question about Dodge Cars & Trucks
...OBD2 diagnostic code on your 2004 Dodge Dakota, there are a few possible reasons: Check the OBD2 connection: Ensure that the OBD2 port is properly connected and functioning. Make sure the cable is ...
no power obd2 port 2003 ford escape why is there no response from obd2 scanner when connected to my 2003 ford escape but when connected to other car gives me response. try another scanner your car may
Question about Cars & Trucks
Many times I loose connection with the OBD2 connector or computer when I and others have there scanner in the obd2 port. What is the most likely cause? Make sure that the connectors pins are tight. ...
...connect the obd2 scanner to your car you plug the end of the included cable with the 16-pin connector to the vehicle 16-pin port, and then connect the other end of the cable to the OBD ii reader. ...
548 questions posted
Usually answered in minutes!
449 Questions
362 Questions
149 Questions
108 Questions